Tested and certified for success

Get your digital products and devices the certifications and standards they need for enhanced consumer confidence and peace of mind.

Arrange a test here.

Certification Programs

Matter 1.0 standard and certification program

Resillion is authorised by the official body, the Connectivity Standards Alliance as a Certification Testing facility for Matter 1.0 testing.

Read more

Wireless Power Transfer Testing (Qi, Ki and LEV)

We can support you with certifying your Qi, Ki (Cordless Kitchen) or LEV (Light Electric Vehicle) products during any time in the development process

Read more

OpenADR Certification

Resillion is the first facility in Europe to be approved by the OpenADR Alliance for certification of OpenADR communications.

Get in touch

ATSC 3.0 Testing

Resillion’s close co-operation with the key ATSC 3.0 bodies, including the CTA and NAB, means we operate the NEXTGEN TV certification testing regime on their behalf.

Read more

Standards and certification programs

Our certification and conformance testing services will help you deliver your certification and conformance objectives. As we constantly monitor changes in conformance specification and the appearance of new regimes, you can be sure that we will deliver the most up to date testing available.

For consumers and end users to enjoy the best connectivity experience, they need the best performance from their Customer Premises Equipment (CPE): the Voice and Data Gateways used to connect their home to the broadband network provide by their ISP, Cable or DSL network providers. Those consumers are also putting increasing pressure on the Gateway thanks to video streaming, online gaming, and large file transfers.

Read more about Voice and Data Gateway Quality Assurance

We can support you with certifying your Qi, Ki (Cordless Kitchen) or LEV (Light Electric Vehicle) products during any time in the development process. We can, as part of this, provide interoperability testing prior to product releases.

ATSC 3.0 is the latest Television Broadcasting standard developed by the Advanced Television Standards Committee (ATSC) in the United States for deployment in North America and elsewhere.

The initial deployment of ATSC 3.0, ‘NEXTGEN TV’, commenced in 2020 with coverage roll-out planned across the whole of the USA into 2021 and beyond.

ATSC 3.0 promises to be the future of broadcast, offering consumers access to technology that will deliver a quality of viewing, never experienced before, from OTA broadcast.

Through collaboration with CE manufacturers, broadcasters, and operators, we strive to provide test solutions that ensure the ongoing conformance to ATSC 3.0 across the industry, and facilitate the Consumer Technology Association’s NEXTGEN TV Logo scheme, defining how devices must comply with the standard.

Resillion’s close co-operation with the key ATSC 3.0 bodies, including the CTA and NAB, means the company operates the NEXTGEN TV certification testing regime on their behalf.

Hybrid broadcast broadband TV (HbbTV) is a global initiative which harmonises the broadcast and broadband delivery of entertainment services to consumers through connected TVs, set-top boxes and multiscreen devices.

Through a longstanding relationship with HbbTV, Resillion has first-hand experience dealing with receiver manufacturers and platform providers as they roll out interoperable HbbTV deployments worldwide. As an HbbTV Registered Test Centre, we perform a range of testing and certification services using our specially developed testing tool, Ligada for HbbTV, including gaining the official HbbTV logo and custom requirements for the following countries:

  • Australia (Freeview Plus)
  • UK (Freeview Play)
  • New Zealand (Freeview)
  • Germany
  • Malaysia
  • The Netherlands
  • Spain (TDT Hibrida)
  • France (TNT 2.0)
  • Italy (Tivu)
  • Croatia (Hakom)

We also test a growing number of applications for conformity alongside the HbbTV specifications and that they will function correctly with HbbTV devices.

More information can be found on the Resillion HbbTV Test Material Portal.

The quality assurance process for media devices demands receivers are fully conformant to any combination of RF specifications. Occasionally, specific accreditation and certification is required for platforms, logos and operator programs.

Resillion is an ISO accredited lab, undertaking RF testing for terrestrial, cable, satellite, ATSC1.0 and latest ATSC3.0 technology, with strong expertise in developing custom plans designed to meet conformance specifications. Our RF team assists with understanding the requirements of the logo and certification/regime processes.

The testing reports provide enough detail to be used as debugging tools, yet equally comprehensive to act as sales collateral to demonstrate a customer’s compliance to prospective customers, with the additional bonus of supporting application for a selection of logos.

 

Country and Regime Coverage includes:

  • ATSC 3 & 1.0 (testing for the US)
  • Nordic countries (NorDig v2.4)
  • UK (D-Book)
  • South Africa (SANS862)
  • Malaysia (SKMM MTSFB TC T004)
  • Thailand (NBTC BS 4002-2555)
  • Singapore (IDA/MDA TS DVB-T2 IRD 2014)
  • Vietnam (QCVN 63)
  • Ghana (NCA v1.0)
  • Rwanda (RURA v1.0)
  • Australia (AS.4933)
  • New Zealand (Freeview v2.3)
  • Italy (DGTVi)
  • LTE Interference (required for D-Book and E-Book)
  • DVB-S (including FreeSat UK)
  • DVB-C (testing for NorDig)

We can further provide custom testing for specific broadcasting profiles.

The HDMI Pre-Compliance test is a vital step in your HDMI development project, preparing for the official HDMI Certification performed at an authorised HDMI testing centre. Our tools and engineering expertise will measure how well your product complies with the HDMI specifications.

HDMI pre- compliance test services are provided across different layers:

  • HDMI PHY Electrical
  • HDMI Protocol
  • HDMI Interoperability
  • HDCP

By curating a test pool of HDMI Sink products for interoperability testing, Resillion gives you insight on how well your product will behave in the market and, where relevant, catch interoperability and functionality issues prior to mass deployment.

Dolby Digital Plus is a mandated requirement in many of the world’s broadcast specifications and OTT platforms, offering an enhanced audio experience and has since become the de-facto standard.

We offer Multistream 10 and 11 (MS10 and MS11) testing to licensees. Tests are conducted in line with Dolby Labs’ specification and standards. Early testing at Resillion significantly reduces production costs by cutting product re-working, meaning a shorter time to market which is essential to commercial success and competitive advantage.

Digital terrestrial television (DTTV or DTT) requires digital devices conform to the standards applicable in their respective countries and territories, so manufacturers must test against the country requirements where they wish to market products. Certification can mean a formal logo or certification regime, or alternatively self-testing to ensure a manufacturer owns the quality and compatibility.

As experts in DTT, Resillion has developed market leading tools and test services, taking a major role assisting countries with their digital switch over, and advising broadcasters and manufacturers on quality conformance programs.

Our testing procedures confirms solutions are brought to market with the highest quality and shortest lead times as possible, usually including SI/PSI testing, RF testing and (if applicable) HbbTV testing.

We provide testing for the following countries and territories:

APAC/ASEAN

  • Malaysia DTT DVB-T2 Receiver Testing: SKMM MTSFB TC T004: 2013
  • Singapore DTT DVB-T2 Receiver Testing: RF and SIPSI testing based on IMDA TS DVB-T2 IRD
  • Australia AS4933 Conformance Testing: Functional, RF and SSU
  • Thailand: SDoC SIPSI, RF and SSU tests according to Thailand NBTC BS 4002-2555 DVB-T2
  • Vietnam: RF and SIPSI Pre-test for QCVN 63 :2012/BTTTT DVB-T/T2 receiver requirements

AFRICA

  • South Africa (SANS) Pre-Testing for STB and iDTV
  • Ghana certification testing (Ghana Digital Thumb)
  • Nigeria DTT Receiver Testing
  • UAE DTT Receiver Testing (Emirates Conformity Assessment Scheme)
  • Kenya DTT Receiver Testing
  • Rwanda DTT Receiver Testing
  • ECOWAS DTT Receiver Testing

EUROPE

  • E-Book SIPSI Receiver Testing
  • Nordig DTT Receiver Testing
  • Italy DTT Receiver Testing
  • Freenet Germany Testing
  • Finnish FiCom Antenna Ready HD and Cable Ready HD
  • Lattelecom Certification Testing
  • Europe DTT Receiver Pretest – over 30 countries

Alexa Voice Service (AVS) is Amazon’s suite of services built around its voice-controlled AI assistant for the home and other environments. Resillion will test Alexa Built-in products, based on the AVS self-test checklists, enabling manufacturers to pre-test their devices via an independent lab before submitting devices to Amazon. Read more about AVS Testing.

Power over Ethernet (PoE) is an industry standard that allows Ethernet cables to transmit both data and power using a sing network cable. This allows installation of powered devices in locations where there is no independent power supply.

Resillion provides in-house resources to test your device and system Power over Ethernet compliance.

We provide manufacturers RF, SIPSI and OAD testing based on SKMM MTSFB TC T004:2013 using test suite MCMC MTSFB TC T011:2020. Our facility in Shenzhen is ISO17025 accredited (Certificate Number: 6773.01) with the scope of accreditation here.
Resillion is an HbbTV Registered Test Centre and can deliver HbbTV testing based on MCMC MTSFB TC G002:2020 using test plan MCMC MTSFB TC T011: 2020 Sections 4.5 and 9.

Resillion can provide RED ETSI EN 303 340 DVB-T and DVB-T2 Receiver Testing. Get in touch for more information.

Resillion has been appointed by The Wireless Power Consortium (WPC) as the exclusive global Qi Interoperability Lab.

A product submitted for Qi Certification will receive final interoperability check at our facilities. Pre- Compliance and Pre-interoperability testing services are also available, meaning you don’t have to wait until the final stage of development for fixes and critical modifications in your implementation, letting you maintain critical mass-production timelines and provide insight of possible compatibility, functionality and interoperability issues prior to product release.

Looking to achieve MFi USB signal integrity for your CarPlay devices? Look no further.

Additional testing services are also available, including:

  • Standard Logo Certifications
  • Global Interoperability Testing
  • USB Testing

N.B. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. Apple CarPlay is a trademark of Apple Inc.

The PCI-SIG Pre-Compliance test is a vital step in your PCI development project, helping you prepare for official PCI-SIG Certification performed at the PCI-SIG workshops. Resillion provides the expertise and tools to characterise the PHY electrical characteristics of any PCIe implementation. During the PCIe pre- compliance testing, we test your design against the latest PCIe electrical test specifications.

If you are developing a product or service that incorporates Ethernet connectivity, you must verify the physical layer of Ethernet devices. Our in-house testing resources validate the complete PHY electrical characteristics of your 10/100 BaseT and Gigabit Ethernet implementation.

Resillion, as a MIPI Contributor member, offers experienced test services for MIPI.d-phy_elec. At our Serial Data Lab, we measure most of the physical MIPI interfaces, along with a Agilent Technologies U4421A which enables us to capture and analyse both CSI-2 and DSI protocol traffic.

We deliver MIPI Physical Layer testing for:

  • Physical layer (transmitter & receiver)
    • D-PHY
    • M-PHY
    • C-PHY
  • Protocol layer (transmitter & receiver)
    • CSI-2
    • DSI

Resillion provides the expertise and tools to measure how well your product meets compliance with the specifications set by the Open Alliance.

As independent QA provider, we support Automotive OEM Tier1 and Tier2 suppliers to deploy robust, interoperable and safe components & systems to the marketplace, and provide Automotive PHY electrical test services for a variety of in-vehicle connectivity standards.

Vendor products that successfully complete the Windows Logo Program are awarded with the Microsoft Certified Logo, which enables simple identification of compatible products designed for ease of use, better performance, and enhanced security.

Resillion’s WHQL Pre-Certification Program gives you the opportunity to get your product Certified for Windows, quickly and confidentially, beginning testing as soon as your product is submitted and assigned a Verisign ID. Should your product not pass the Program, our dedicated test engineers will help to debug any problems.

Matter is the unified standard for connected things, one that has seen widespread adoption in the industry. It offers the promise of reliable, secure connectivity — a seal of approval that devices will work seamlessly together, today, and tomorrow. Matter creates more connections between more objects, simplifying development or manufacturers, and increasing compatibility for consumers. This collaborative breakthrough is built on proven technologies and guided by the Connectivity Standards Alliance, whose members come together from across industries to transform the future of connectivity.

Products and software components that are certified and approved to support Matter will display the Matter logo signifying to customers interoperability, security, simplicity, and reliability.

Contact us for new Matter 1.0 product certification, or for help with rapid recertification of updated products.

Resillion is the first facility in Europe to be approved by the OpenADR Alliance for certification of OpenADR communications.

Certification can be applied to Virtual Top Node devices (VTNs), such as information exchange servers and Virtual End Node devices (VENs) like load controllers, thermostats and EV charging devices.

Certified devices will be authorised to join utility OpenADR programmes.

Resillion is supporting the adoption and continued delivery of ATSC 3.0 through the NEXTGEN TV Logo, and ATSC 3 Security Authority (A3SA) certification programs.

In association with the CTA, NAB, and ATSC, Resillion developed a suite of test tools and materials used to test devices to provide consistent conformance of implementations to the ATSC 3.0 standard. These tests, once passed and approved, facilitate certification of the NEXTGEN TV Logo.

Resillion further provides test facilities for A3SA (ATSC3 Security Authority) certification programs. A3SA provides enhanced security of content through digital rights management and service protection across the ATSC 3.0 standard for devices and broadcasters.

Resillion is the approved certification lab for Freeview Plus Certification. Using the official test tool (developed in-house) Ligada for HbbTV, we provide successful manufacturers with a report that is recognised by Freeview Australia and includes the mandated HbbTV DRM testing.

The close alignment of this standard with Freeview New Zealand means that certification is a significant step in gaining Freeview New Zealand certification.

Resillion will assist your solution through hosting services that require debug and retesting support. All test materials used for the official certification process will be available, with additional cooperation from our dedicated HbbTV engineers to walk you through the criteria in detail as required.

Our experts can also undertake Australia AS4933 testing for RF conformance, functional and SSU testing to ensure your product is conforming to country variants.

Want to know more about our HbbTV Test Tool that supports Australian DVB-T settings?

Resillion is the approved certification lab for Freeview Plus Certification. Using the official test tool (developed in-house) Ligada for HbbTV, along with appropriate RF testing equipment and NZ SI test suite. This provides successful manufacturers with a report that is recognised by Freeview New Zealand, to confirm conformance, and includes the Freeview New Zealand mandated HbbTV DRM testing.

Resillion will assist your solution through hosting services that require debug and retesting support. All test materials used for the official certification process will be available, with additional cooperation from our dedicated HbbTV engineers to walk you through the criteria in detail as required.

Elements of the HbbTV certification are closely aligned to FreeView Australia testing, and is a significant step towards gaining Freeview Australia certification.

Want to know more about our HbbTV Test Tool? Find out more on the Ligada iSuite for HbbTV Test Tool page here [link to page]

The HDMI Pre-Compliance test is a vital step in your HDMI development project, preparing for the official HDMI Certification performed at an authorised HDMI testing centre. Our tools and engineering expertise will measure how well your product complies with the HDMI specifications.

HDMI pre- compliance test services are provided across different layers:

  • HDMI PHY Electrical
  • HDMI Protocol
  • HDMI Interoperability
  • HDCP

By curating a test pool of HDMI Sink products for interoperability testing, Resillion gives you insight on how well your product will behave in the market and, where relevant, catch interoperability and functionality issues prior to mass deployment.

Resillion is a Digital Living Network Alliance (DLNA) accredited Independent Certification Vendor (ICV), providing testing and certification services as part of the official DLNA Certification Program. Resillion has an extensive set of modular testing solutions catered for your testing or certification needs, and our labs are equipped with the latest DLNA approved test tools, including:

  • Media Capabilities Verification Tool (MCVT)
  • Conformance Test Tool (CTT)
  • Approved Interoperability Testing Devices
  • Auto-IP or Small Network Testing
  • Link Protection Test Tool (LPTT)

Only devices, or software, that have met the DLNA design guidelines and passed the relevant certification tests can use the DLNA logo.

Resillion is an official independent test centre for USB device testing and certification, offering an objective, third-party opinion on the overall quality of your USB product. Our expert engineers support USB product development and test stand-alone devices, embedded hosts and full systems.

The following tests are available:

  • PHY Electrical
  • Protocol
  • Link Layer
  • Interoperability
  • USB Cable & Connector (incl. Type-C™)
  • USB Power Delivery & Battery Charging

DISCLAIMER

This information is provided for convenience only. This information is not and should not be relied upon as an official communication of USB Implementers Forum (USB-IF). Official communications of USB-IF are available at its website at usb.org or directly from USB-IF.

Resillion is an authorised test lab for SATA-IO including all product types (Disc Drives; PC Hosts; Port Multipliers; Building Blocks etc.). The SATA Certification program consists of:

  • Product Electrical
  • Product Digital
  • System Interop
  • Device Mechanical

When a SATA product succeeds in Resillion’s SATA-IO interoperability program, it will receive the SATA Certified logo. SATA certified products assure a high level of interoperability with other certified devices. Your SATA product will be tested using procedures as specified in the Interoperability Program Test Procedures.

Get in touch








    Our Accreditations and Certifications

    Crest Accreditation Resillion
    A2LA_Accredited
    Check Penetration Testing
    RvA L690 Accreditation
    ISO 27001
    ISO 9001 Resillion
    CCV Cyber Pentest
    Cyber Essentials
    CE+assessor

    Contact Us